• Two 'L' shaped arms easily fit into the tow bar mounting and carry the bikes by their frames.
  
  
• Fits a very wide range of frame shapes and types. Car friendly – sits on the tow ball and doesn't touch the car's paintwork.
  
  
• Bikes are strapped together using the supplied webbing straps and secured to the rack.
  
  
• Hang on Racks can carry most fat bikes and are available with different offsets to clear the rear of Discovery’s and Land Rover’s Spare Wheels. See our measuring guide for further information.

Capacity: 3 / 4
Load Weight: 15kg per bike
Rack Weight: 6kg / 8kg
Light Unit: Not Included
Securing Straps: Included

Make sure the nose weight of your tow bar is enough to support the combined weight of our bikes and the rack.

These racks can't be used whilst towing a trailer or caravan.

3 (and 4) Bike Arms: They can carry up to a maximum of 3 (or 4) bikes although 2 (or 3) bikes may be the maximum for bikes with wider tyres, handlebars, or pedals. If you need to carry specifically 3 (or 4) bikes or bikes with complex frame shapes, then we suggest looking at our wheel support racks.

Retractable Tow Bars: If using with a retractable swan neck tow bar, you may not be able to retract and stow the tow ball with the 'On the Ball' mounting block fitted.

Note on use with motorhomes – We do not recommend using ‘On the Ball’ mounting racks with motorhomes. We recommend checking with the manufacturer of the tow bar as to the suitability for use with a ‘Behind the Ball’ bike rack.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

We offer two different types of mounting block so our racks can be used with any type of towbar. The appropriate mounting block for you depends on the type of tow bar you have and whether you wish to tow whilst having a rack in place. Order your rack with one of these mounts.

Ball Mounting

Will fit: Swan neck, detachable and Mounting standard 2 bolt flange tow bars.

A universal mount that fits around the tow ball and consists of two parts which are bolted securely together – the first part contains the sockets which the bike rack arms fit into and the second part is a back plate so the two components sandwich around the tow ball. Both parts are moulded inside to the shape of a tow ball to give a perfectly sturdy, secure fit. Due to the way this fits around the ball you will be unable to tow when the mounting is in place.

Please note Ball Mounting option is not available in Higher Racks.

Behind-the-ball Mounting

Will fit: Standard 2 bolt flange tow bars only.

A standard mount that fits securely between the tow ball and towing bracket of standard 2 bolt flange tow bars. Ideal for people wanting to tow while carrying their bikes. Please read individual rack descriptions, as not all racks are suitable for towing. When towing with a Pendle Bike Rack we advise that a maximum of two bikes are carried and that individuals check their towing set-up and turning circles with the rack and bikes fitted, before setting off on their journey.

• Fits almost any vehicle with a tow bar and almost any bike. The bike is held in place by both tyres and leans against a vertical support, giving a very solid and stable fitting. Straps secure the bike to the rack at these 3 points.
  
  
• No fiddly bike clamps that could damage the paintwork or don't fit your bike. Modular design makes it easy to strip down to component parts or leave partially assembled while not in use.
  
  
• Adjusts for wheelbase, frame shape and bike widths, standard D loops are suitable for 26", 29" and Road Wheels. Wider D Loops available on request for up to 3" tyres, standard fittings work with up to 2.25" tyres. Children’s attachments are also available.
  
  
• Our Wheel Supports can be adapted to clear the spare wheels on vehicles. Please contact us to enquire further.

Capacity: 2 / 3 / 4
Load Weight: 15kg per bike
Rack Weight: 12kg / 16kg / 18.5kg
Light Unit: Included
Securing Straps: Included

Check your vehicle's nose weight – the combined weight of the rack and bikes must not exceed this.

Retractable Tow Bars - If using with a retractable swan neck tow bar, you may not be able to retract and stow the tow ball with the 'On the Ball' mounting block fitted.

The light unit is fitted with a 7-pin plug, we also sell a 13-7 Pin Adaptor for vehicles fitted with 13 pin sockets.

Note on use with motorhomes – We do not recommend using ‘On the Ball’ mounting racks with motorhomes. We recommend checking with the manufacturer of the tow bar as to the suitability for use with a ‘Behind the Ball’ bike rack.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

We offer two different types of mounting block so our racks can be used with any type of towbar. The appropriate mounting block for you depends on the type of tow bar you have and whether you wish to tow whilst having a rack in place. Order your rack with one of these mounts.

Ball Mounting

Will fit: Swan neck, detachable and Mounting standard 2 bolt flange tow bars.

A universal mount that fits around the tow ball and consists of two parts which are bolted securely together – the first part contains the sockets which the bike rack arms fit into and the second part is a back plate so the two components sandwich around the tow ball. Both parts are moulded inside to the shape of a tow ball to give a perfectly sturdy, secure fit. Due to the way this fits around the ball you will be unable to tow when the mounting is in place.

Please note Ball Mounting option is not available in Higher Racks.

Behind-the-ball Mounting

Will fit: Standard 2 bolt flange tow bars only.

A standard mount that fits securely between the tow ball and towing bracket of standard 2 bolt flange tow bars. Ideal for people wanting to tow while carrying their bikes. Please read individual rack descriptions, as not all racks are suitable for towing. When towing with a Pendle Bike Rack we advise that a maximum of two bikes are carried and that individuals check their towing set-up and turning circles with the rack and bikes fitted, before setting off on their journey.

• Two 'L' shaped arms easily fit into the tow bar mounting and carry the bikes by their frames.
  
  
• Arms have a 10" offset to allow clearance of spare wheels.
  
  
• Fits a very wide range of frame shapes and types. Car friendly – sits on the tow ball and doesn't touch the car's paintwork.
  
  
• Bikes are strapped together using the supplied webbing straps and secured to the rack.

Capacity: 4 Bikes
Load Weight: 15kg
Rack Weight: 9kg
Light Unit: Not Included
Securing Straps: Included

Make sure the nose weight of your tow bar is sufficient to support the combined weight of your bikes and the rack.

These racks can't be used whilst towing a trailer or caravan.

If your vehicle does have a spare wheel then please see our measuring guide to determine which offset is needed.

Retractable Tow Bars: If using with a retractable swan neck tow bar, you may not be able to retract and stow the tow ball with the 'On the Ball' mounting block fitted.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

We offer two different types of mounting block so our racks can be used with any type of towbar. The appropriate mounting block for you depends on the type of tow bar you have and whether you wish to tow whilst having a rack in place. Order your rack with one of these mounts.

Ball Mounting

Will fit: Swan neck, detachable and Mounting standard 2 bolt flange tow bars.

A universal mount that fits around the tow ball and consists of two parts which are bolted securely together – the first part contains the sockets which the bike rack arms fit into and the second part is a back plate so the two components sandwich around the tow ball. Both parts are moulded inside to the shape of a tow ball to give a perfectly sturdy, secure fit. Due to the way this fits around the ball you will be unable to tow when the mounting is in place.

Please note Ball Mounting option is not available in Higher Racks.

Behind-the-ball Mounting

Will fit: Standard 2 bolt flange tow bars only.

A standard mount that fits securely between the tow ball and towing bracket of standard 2 bolt flange tow bars. Ideal for people wanting to tow while carrying their bikes. Please read individual rack descriptions, as not all racks are suitable for towing. When towing with a Pendle Bike Rack we advise that a maximum of two bikes are carried and that individuals check their towing set-up and turning circles with the rack and bikes fitted, before setting off on their journey.

• Fitted with individual bike slots or wheel mounts, which are adjustable to allow for various sizes of bicycles.
  
  
• The bikes are separated by tilting vertical supports, which the frames rest against.
  
  
• The bikes are held securely in position by the strong webbed straps provided to ensure safe transport.
  
  
• Comes complete with a safety cable

• Please note the 6 bike trailer does not come with a spare wheel, these can be added at an additional cost.

Raised Supports for longer bikes: Now available with optional raised tyre supports at the front. The front 6 tyre supports are replaced by raised versions which allow longer bikes to fit outside the chassis. These are recommended for any bikes with long wheelbases, particularly downhill mountain bikes and electric bikes or any bike with a wheelbase greater than 1100 mm.

Tandem enthusiasts: There are fittings available to enable tandems to be transported on the 6 bike trailer. Please enquire further.

Capacity: 6 Bikes
Load Weight: 25kg (per bike)
Trailer Weight: 100kg
Light Unit: Included
Securing Straps: Included

Our trailers are Type Approved. It is a legal requirement that all new trailers sold in the UK are type approved.

6 Bike trailers are manufactured to order and are usually subject to a 4 week lead time.

Please note that as this is such a large item it is not subject to our usual delivery charges.

Standard delivery is of a palletised trailer which requires some simple assembly (two people may be required for lifting the chassis, assembly consists of fitting and tightening nuts and bolts and requires spanners and sockets).

Pallet UK delivery is £65.00. We also offer 'enhanced delivery' options of Pre-10am or nominated timed delivery at an additional charge of £20.00 (please select this option at time of purchase. Delivery of a fully assembled trailer may be arranged but will be subject to extra costs.

• Bicycle wheels are supported by extra wide 3" D Loops which can be adjusted to fit different wheel bases. The rack can also be adjusted to different frame shape and bike widths.
  
  
• The bike is held in place by both tyres and leans against a vertical support, giving a very solid and stable fitting. Straps secure the bike to the rack at these 3 points.
  
  
• No fiddly bike clamps that could damage the paintwork or don't fit your bike. Modular design makes it easy to strip down to component parts or leave partially assembled while not in use.

Capacity: 2 bikes
Load Weight: 25kg per bike
Rack Weight: 19kg
Light Unit: Included
Securing Straps: Included

Check your vehicle's nose weight – the combined weight of the rack and bikes must not exceed this.

Retractable Tow Bars - If using with a retractable swan neck tow bar, you may not be able to retract and stow the tow ball with the 'On the Ball' mounting block fitted.

The light unit is fitted with a 7-pin plug, we also sell a 13-7 Pin Adaptor for vehicles fitted with 13 pin sockets.

Note on use with motorhomes – We do not recommend using ‘On the Ball’ mounting racks with motorhomes. We recommend checking with the manufacturer of the tow bar as to the suitability for use with a ‘Behind the Ball’ bike rack.

Vehicles with external spare wheels may need extended support poles to suit the external spare wheel. Please contact for further info.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

We offer two different types of mounting block so our racks can be used with any type of towbar. The appropriate mounting block for you depends on the type of tow bar you have and whether you wish to tow whilst having a rack in place. Order your rack with one of these mounts.

Ball Mounting

Will fit: Swan neck, detachable and Mounting standard 2 bolt flange tow bars.

A universal mount that fits around the tow ball and consists of two parts which are bolted securely together – the first part contains the sockets which the bike rack arms fit into and the second part is a back plate so the two components sandwich around the tow ball. Both parts are moulded inside to the shape of a tow ball to give a perfectly sturdy, secure fit. Due to the way this fits around the ball you will be unable to tow when the mounting is in place.

Please note Ball Mounting option is not available in Higher Racks.

Behind-the-ball Mounting

Will fit: Standard 2 bolt flange tow bars only.

A standard mount that fits securely between the tow ball and towing bracket of standard 2 bolt flange tow bars. Ideal for people wanting to tow while carrying their bikes. Please read individual rack descriptions, as not all racks are suitable for towing. When towing with a Pendle Bike Rack we advise that a maximum of two bikes are carried and that individuals check their towing set-up and turning circles with the rack and bikes fitted, before setting off on their journey.

• Two 'L' shaped arms easily fit into the tow bar mounting and carry the bikes by their frames. Fits a very wide range of frame shapes and types.
  
  
• Different arm offset options are available, these move the bikes further away from the vehicle to clear spare wheels or the bodywork of cars with very flat backs (e.g. MPV's and 4x4's).
  
  
• Bikes are strapped together using the supplied webbing straps and secured to the rack.
  
  
• Available in 4 bike Standard arms or 4 Bike Discovery arms with a 150mm (6 inch) offset to clear spare wheels or vehicles with very flat backs.

Capacity: 4 Bikes (2 Bikes whilst towing)
Load Weight: 15kg per bike
Rack Weight: 11.5kg (STD Arms) / 12kg (Discovery Arms)
Light Unit: Not Included
Securing Straps: Included

IMPORTANT: Whilst towing we usually recommend carrying 2 bikes to maintain clearance to the body of your caravan during tight turns.

Check your vehicles nose weight – the combined weight of the rack and bikes must not exceed this. If towing this must be added to the trailer nose weight too.

4 Bike Arms: The arms have 425mm of space for hanging the bikes by their frames. They can carry a maximum of 4 bikes although 3 bikes may be the maximum for bikes with wider tyres, handlebars, or pedals.

If your vehicle does have a spare wheel then please see our measuring guide to determine which offset is needed.

We recommend before using the rack, fitting it and loading bikes to checking the clearance to the caravan/trailer on full lock and on an incline to make sure that the bikes don’t touch the trailer/caravan.

Due to the variation in shapes of vehicles, trailers or caravans we cannot guarantee that all combinations will be able to work together. Please contact if you’re unsure.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

We offer two different types of mounting block so our racks can be used with any type of towbar. The appropriate mounting block for you depends on the type of tow bar you have and whether you wish to tow whilst having a rack in place. Order your rack with one of these mounts.

Ball Mounting

Will fit: Swan neck, detachable and Mounting standard 2 bolt flange tow bars.

A universal mount that fits around the tow ball and consists of two parts which are bolted securely together – the first part contains the sockets which the bike rack arms fit into and the second part is a back plate so the two components sandwich around the tow ball. Both parts are moulded inside to the shape of a tow ball to give a perfectly sturdy, secure fit. Due to the way this fits around the ball you will be unable to tow when the mounting is in place.

Please note Ball Mounting option is not available in Higher Racks.

Behind-the-ball Mounting

Will fit: Standard 2 bolt flange tow bars only.

A standard mount that fits securely between the tow ball and towing bracket of standard 2 bolt flange tow bars. Ideal for people wanting to tow while carrying their bikes. Please read individual rack descriptions, as not all racks are suitable for towing. When towing with a Pendle Bike Rack we advise that a maximum of two bikes are carried and that individuals check their towing set-up and turning circles with the rack and bikes fitted, before setting off on their journey.

• Two 'L' shaped arms easily fit into the tow bar mounting and carry the bikes by their frames.
  
  
• Arms have a 6" offset which is ideal for flat backed vehicles such as people carriers and 4x4 vehicles with small rear spare wheels.

• Fits a very wide range of frame shapes and types. Car friendly – sits on the tow ball and doesn't touch the car's paintwork.
  
  
• Bikes are strapped together using the supplied webbing straps and secured to the rack.

Capacity: 4 Bikes
Load Weight: 15kg per bike
Rack Weight: 8.5kg
Light Unit: Not Included
Securing Straps: Included

Make sure the nose weight of your tow bar is sufficient to support the combined weight of your bikes and the rack.

These racks can't be used whilst towing a trailer or caravan.

If your vehicle does have a spare wheel then please see our measuring guide to determine which offset is needed.

Retractable Tow Bars: If using with a retractable swan neck tow bar, you may not be able to retract and stow the tow ball with the 'On the Ball' mounting block fitted.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

We offer two different types of mounting block so our racks can be used with any type of towbar. The appropriate mounting block for you depends on the type of tow bar you have and whether you wish to tow whilst having a rack in place. Order your rack with one of these mounts.

Ball Mounting

Will fit: Swan neck, detachable and Mounting standard 2 bolt flange tow bars.

A universal mount that fits around the tow ball and consists of two parts which are bolted securely together – the first part contains the sockets which the bike rack arms fit into and the second part is a back plate so the two components sandwich around the tow ball. Both parts are moulded inside to the shape of a tow ball to give a perfectly sturdy, secure fit. Due to the way this fits around the ball you will be unable to tow when the mounting is in place.

Please note Ball Mounting option is not available in Higher Racks.

Behind-the-ball Mounting

Will fit: Standard 2 bolt flange tow bars only.

A standard mount that fits securely between the tow ball and towing bracket of standard 2 bolt flange tow bars. Ideal for people wanting to tow while carrying their bikes. Please read individual rack descriptions, as not all racks are suitable for towing. When towing with a Pendle Bike Rack we advise that a maximum of two bikes are carried and that individuals check their towing set-up and turning circles with the rack and bikes fitted, before setting off on their journey.

• Fits almost any vehicle with a tow bar and almost any bike. The bike is held in place by both tyres and leans against a vertical support, giving a very solid and stable fitting. Straps secure the bike to the rack at these 3 points.
  
  
• No fiddly bike clamps that could damage the paintwork or don't fit your bike. Modular design makes it easy to strip down to component parts or leave partially assembled while not in use.
  
  
• Adjusts to fit your bike in seconds, adjusts for wheelbase, frame shape and bike widths.
  
  
• Bicycle wheels are supported by extra wide 3" D Loops which can be adjusted to fit different wheel bases.

Capacity: 2 Bikes
Load Weight: 25kg
Rack Weight: 19kg
Light Unit: Included
Securing Straps: Included

Check your vehicle's nose weight – the combined weight of the rack and bikes must not exceed this.

Vehicles with external spare wheels may need extended support poles to suit the external spare wheel. Please contact for further info.

Retractable Tow Bars - If using with a retractable swan neck tow bar, you may not be able to retract and stow the tow ball with the 'On the Ball' mounting block fitted.

The light unit is fitted with a 7-pin plug, we also sell a 13-7 Pin Adaptor for vehicles fitted with 13 pin sockets.

Note on use with motorhomes – We do not recommend using ‘On the Ball’ mounting racks with motorhomes. We recommend checking with the manufacturer of the tow bar as to the suitability for use with a ‘Behind the Ball’ bike rack.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

We offer two different types of mounting block so our racks can be used with any type of towbar. The appropriate mounting block for you depends on the type of tow bar you have and whether you wish to tow whilst having a rack in place. Order your rack with one of these mounts.

Ball Mounting

Will fit: Swan neck, detachable and Mounting standard 2 bolt flange tow bars.

A universal mount that fits around the tow ball and consists of two parts which are bolted securely together – the first part contains the sockets which the bike rack arms fit into and the second part is a back plate so the two components sandwich around the tow ball. Both parts are moulded inside to the shape of a tow ball to give a perfectly sturdy, secure fit. Due to the way this fits around the ball you will be unable to tow when the mounting is in place.

Please note Ball Mounting option is not available in Higher Racks.

Behind-the-ball Mounting

Will fit: Standard 2 bolt flange tow bars only.

A standard mount that fits securely between the tow ball and towing bracket of standard 2 bolt flange tow bars. Ideal for people wanting to tow while carrying their bikes. Please read individual rack descriptions, as not all racks are suitable for towing. When towing with a Pendle Bike Rack we advise that a maximum of two bikes are carried and that individuals check their towing set-up and turning circles with the rack and bikes fitted, before setting off on their journey.

• The bike is held in place by the tyres, giving a very solid and stable fitting. Straps secure the bike to the rack at these 3 points. Adjustable to fit wheelbases between 980 and 1350mm and track widths of up to 860mm.
  
  
• The D Loops will fit tyres up to 3 inches wide – (different sizes are available, please contact us for more information).
  
  
• The modular design makes it easy to strip down to component parts or leave partially assembled while not in use.
  
  
• Extra supports are available to buy at an additional cost to enable carrying a trike plus a standard or electric bike. This is subject to where room allows to fit a bike and also weight restrictions.

• For the trike plus one standard or electric bike you would need to ensure that your trike track width is no bigger than 600mm this then allows 200mm room for your bike.

• However we can't guarantee fitting in all circumstances but customers may return the rack if the bikes don't fit. For more information on this please see our returns policy.

Capacity: 1 Trike or 1 Trike + 1 Bike - Not exceeding the maximum weight of 60kg.
Load Weight: 35kg (Trike), 15kg - 25kg (Bike)
Rack Weight: 18kg (Trike), 21kg (Trike +1)
Light Unit: Included
Securing Straps: Included

Check your vehicle's nose weight – the combined weight of the rack and bikes must not exceed this.

Retractable Tow Bars: If using with a retractable swan neck tow bar, you may not be able to retract and stow the tow ball with the 'On the Ball' mounting block fitted.

Please note that this product requires customers to sign a disclaimer to show that they are aware that this rack is over 1 metre long which may be classed as a trailer on some ferry services.

Light units are fitted with a 7-pin plug, we also sell a 13-7 Pin Adaptor for vehicles fitted with 13 pin sockets.

Note on use with motorhomes – We do not recommend using ‘On the Ball’ mounting racks with motorhomes. We recommend checking with the manufacturer of the tow bar as to the suitability for use with a ‘Behind the Ball’ bike rack.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

We offer two different types of mounting block so our racks can be used with any type of towbar. The appropriate mounting block for you depends on the type of tow bar you have and whether you wish to tow whilst having a rack in place. Order your rack with one of these mounts.

Ball Mounting

Will fit: Swan neck, detachable and Mounting standard 2 bolt flange tow bars.

A universal mount that fits around the tow ball and consists of two parts which are bolted securely together – the first part contains the sockets which the bike rack arms fit into and the second part is a back plate so the two components sandwich around the tow ball. Both parts are moulded inside to the shape of a tow ball to give a perfectly sturdy, secure fit. Due to the way this fits around the ball you will be unable to tow when the mounting is in place.

Please note Ball Mounting option is not available in Higher Racks.

Behind-the-ball Mounting

Will fit: Standard 2 bolt flange tow bars only.

A standard mount that fits securely between the tow ball and towing bracket of standard 2 bolt flange tow bars. Ideal for people wanting to tow while carrying their bikes. Please read individual rack descriptions, as not all racks are suitable for towing. When towing with a Pendle Bike Rack we advise that a maximum of two bikes are carried and that individuals check their towing set-up and turning circles with the rack and bikes fitted, before setting off on their journey.

The large, open hook fits tyres up to 2.4" and wheel and has a thick, cushioned plastic coating that is kind to your wheel.

It is quickly and easily fastened to the ceiling, it must be fastened to a beam or other strong part of ceiling.

Maximum opening size = 75mm

Installation Guidance: Do not fasten to plasterboard or similar non-structural materials.

Screws not supplied - You need to obtain the correct type of screw / plug for the type of material you are fastening to.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

• Designed for simple mounting of the rack onto standard square roof bars on your car, adaptable to fit any spacing. Carries one tandem bike on the roof in an upright position, for simple, easy bike loading.
  
  
• The bike wheels are supported along the base of the rack by two adjustable wheel holders to fit different wheel bases. The bike frame is held in position by brackets attached to two upright vertical arms. These are height adjustable to accommodate different frame shapes and can also be folded down for easy storage.
  
  
• Fasten the bike to the rack with the straps provided, and you’re away – SIMPLE!

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

The two, soft sleeved arms can be used to support the bike by the cross bar or seat post and downtube.

Laser cut steel construction.

Please note screws/bolts not included.

Capacity - up to 2 bikes, up to 15kg each.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

Innovative snap together laser cut construction makes it easy to assemble from a flat pack with just 1 bolt to hold it together.

The Mid Version provides a tyre holder to hold the bike clear of the wall and give extra support to the tyre.

You will need to obtain the correct type of screws and plugs to fix to your wall.

After that assembly is simple, plastic bungs are supplied to blank off the screw holes for a clean look.

The large tyre holder holds the wheel steady and stops it from making contact with the wall.

This stand is ideal for moving up a step from the generic DIY store hook in the ceiling to something more substantial or in scenarios where hanging from the wall is the only option.

Another advantage is the ability to place the holder at a height that suits your needs rather than being limited by the height of the ceiling.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

• Designed for simple mounting of the rack onto standard square roof bars on your car, adaptable to fit any spacing. Carries one tandem bike on the roof in an upright position, for simple, easy bike loading.
  
  
• The rack allows for a kiddie crank fitment and is made for tandems which have one easily detachable wheel. The rear wheel is supported in a wheel holder and the front wheel forks are supported by a T Bar attachment.
  
  
• The bike frame is held in place in an upright position by a bracket attached to a single vertical arm. The bracket is height adjustable to accommodate different frame shapes and the arms fold down for easy storage.
  
  
• Adjustable rear wheel holder along the main frame to accommodate different wheel bases.

Capacity: 1 Tandem
Load Weight: 25kg
Rack Weight: 10kg
Light Unit: N/A
Securing Straps: Included

Vehicle must be equipped with crossbars.

The wheel is strapped into the wheel holder and the tandem frame is strapped to the vertical arm.

The T-Bar Tandem Rack is designed to fit standard square roof bars. If your vehicle is fitted with Aero bars, please contact us to determine the correct adaptor to fit them.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

• The bike is held in place by both tyres and leans against a vertical support, giving a very solid and stable fitting. Also available with attachments for children's bikes and 3-inch tyres. Please enquire.
  
  
• Straps secure the bike to the rack at these 3 points.
  
  
• No fiddly bike clamps that could damage the paintwork or don't fit your bike. Adjusts to fit your bike in seconds, adjusts for wheelbase, frame shape and bike widths.
  
  
• Modular design makes it easy to strip down to component parts or leave partially assembled while not in use.

Capacity: 1 / 2
Load Weight: 15kg per bike
Rack Weight: 9kg / 13kg
Light Unit: Included
Securing Straps: Included

All higher racks use our Behind the Ball mounting. This is not suitable for anything other than Standard 2 bolt tow bars.

Check your vehicle's nose weight – the combined weight of the rack and bikes must not exceed this, if towing this must be added to the trailer nose weight too.

Vehicles with external spare wheels may need extended support poles to suit the external spare wheel. Please contact us for further info.

The light unit is fitted with a 7-pin plug, we also sell a 13-7 Pin Adaptor for vehicles fitted with 13 pin sockets.

We recommend before using the rack, fitting it and loading bikes to checking the clearance to the caravan/trailer on full lock and on an incline to make sure that the bikes don’t touch the trailer/caravan.

Due to the variation in shapes of vehicles, trailers or caravans we cannot guarantee that all combinations will be able to work together. Please contact if you’re unsure.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

We offer two different types of mounting block so our racks can be used with any type of towbar. The appropriate mounting block for you depends on the type of tow bar you have and whether you wish to tow whilst having a rack in place. Order your rack with one of these mounts.

Ball Mounting

Will fit: Swan neck, detachable and Mounting standard 2 bolt flange tow bars.

A universal mount that fits around the tow ball and consists of two parts which are bolted securely together – the first part contains the sockets which the bike rack arms fit into and the second part is a back plate so the two components sandwich around the tow ball. Both parts are moulded inside to the shape of a tow ball to give a perfectly sturdy, secure fit. Due to the way this fits around the ball you will be unable to tow when the mounting is in place.

Please note Ball Mounting option is not available in Higher Racks.

Behind-the-ball Mounting

Will fit: Standard 2 bolt flange tow bars only.

A standard mount that fits securely between the tow ball and towing bracket of standard 2 bolt flange tow bars. Ideal for people wanting to tow while carrying their bikes. Please read individual rack descriptions, as not all racks are suitable for towing. When towing with a Pendle Bike Rack we advise that a maximum of two bikes are carried and that individuals check their towing set-up and turning circles with the rack and bikes fitted, before setting off on their journey.

The holder fixes at the bottom of a garage wall and can also be bolted on to any other wall, particularly outside walls of buildings and is popular amongst businesses as cycle holder provision for their employees.

The Wall Cycle Holder is designed to support the front wheel of the bike.

Once the wheel is in position it can be secured and locked easily with a bike chain.

The standard Wall Cycle Holder juts out from the wall at 90 degrees, but we can also provide them so that the angle is 45 degrees.

These need to be specifically asked for at the time of ordering.

Please note screws/bolts not included.

Bike Capacity: 1

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

• The Pendle 12 bike trailer incorporates all the great design features of the 6-bike trailer, making it a very simple, effective way to carry lots of bikes.
  
  
• Fitted with individual bike slots or wheel mounts, which are adjustable to allow for various sizes of bicycles. The bikes are separated by tilting vertical supports, which the frames rest against and are adjustable to fit any frame shape.
  
  
• The bikes are held securely in position by the strong webbed straps provided to ensure safe transport.
  
  
• The 12-bike trailer is supplied with a spare wheel and a safety cable.

Capacity: 12 Bikes
Load Weight: 25kg (per bike)
Trailer Weight: 300kg
Light Unit: Included
Securing Straps: Included

New wheels and other spares are available to current owners, please call/email for more information.

Tandem enthusiasts: Tandems can also be transported on the 12-bike trailer making it ideal for group or club outings. Please contact us for further information.

Our trailers are Type Approved. It is a legal requirement that all new trailers sold in the UK are type approved.

12 Bike trailers are manufactured to order and are subject to a minimum lead time of 10 working days.

Please note that as this is such a large item it is not subject to our usual delivery charges - Standard delivery is charged at £1.20 per mile from BB9 postcode. Alternatively, these can be collected free of charge from our works.

Innovative snap together laser cut construction makes it easy to assemble from a flat pack with just 1 bolt to hold it together.

The Long Version provides a tyre holder to hold the bike clear of the wall and give extra support to the tyre, it also includes a security loop positioned close the bottom bracket of the bike.

This allows the user to strap the bike down firmly in place or to pass through a bike lock as part of a theft deterrent system.

You will need to obtain the correct type of screws and plugs to fix to your wall.

After that assembly is simple, plastic bungs are supplied to blank off the screw holes for a clean look.

The large tyre holder holds the wheel steady and stops it from making contact with the wall. This stand is ideal for moving up a step from the generic DIY store hook in the ceiling to something more substantial or in scenarios where hanging from the wall is the only option.

Another advantage is the ability to place the holder at a height that suits your needs rather than being limited by the height of the ceiling.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.

Innovative snap together laser cut construction makes it easy to assemble from a flat pack with just 1 bolt to hold it together.

You will need to obtain the correct type of screws and plugs to fix to your wall.

After that assembly is simple, plastic bungs are supplied to blank off the screw holes for a clean look.

The hook may be rotated to turn the bike so that it takes up less room.

This stand is ideal for moving up a step from the generic DIY store hook in the ceiling to something more substantial or in scenarios where hanging from the wall is the only option.

Another advantage is the ability to place the holder at a height that suits your needs rather than being limited by the height of the ceiling.

Standard UK delivery is £2.95 for orders less than £50.00, or FREE if your order is over £50.00 (excluding trailers).

Standard delivery is usually made within 5 working days of your order being placed.

Deliveries will be made between 7am and 6pm Monday to Friday (excluding bank holidays). Deliveries will be made within 48 hours of despatch. Despatch is subject to availability, but we do not allow products to be purchased unless there is sufficient stock to ensure prompt despatch.

Delivery will be made to the address of the registered debit/ credit card holder used to place the order (or another nominated delivery address) and must be a UK address only. Despite our best efforts, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control. We will do our best to contact you if we are forewarned of delays. For this reason we are unable to accept responsibility for lost working time and recommend goods are ordered well in advance of any planned usage dates.